Can you move toilet plumbing

Quite literally Nu-Trend would need one of our qualified local plumbers to come and look at the property to assess or compare the position of the sewer vs the stack vs surrounding ventilation vs where you wanted to move the toilet to so that we can work out if it is possible and legal. Yes it is quite possible to put your toilet anywhere you like in your house as long as it complies with the local laws and will achieve council approvals.

In some situations your toilet and sink might be able to share the same drain although it would need to be sized correctly and plumbed in a certain way to meet legal requirements or pipe sizing. If you hear a strange gurgling noise from your toilet it can mean a few different things depending on the property. So in some scenarios it could be related to incorrect venting, the beginning of a pipe blockage or simply just old, poor, plumbing that has had its day. You can tell if your vent stack is clogged when you start to experience bad smells, gurgling or even sewer overflow.

By hiring a Nu-Trend qualified plumber we can use our CCTV digital camera equipment to inspect the lines to see what is causing the issue. Every toilet needs to be connected to a vented sewer line in the appropriate position to function properly. This includes any toilet that is relocated or moved because the venting may also need to be adjusted.

The size needed for venting will depend and vary for each specific toilet relocation project as every property and situation is unique. You can run toilet vents horizontally however vent pipes must be run in a way where water will be able to drain with no obstructions. Every toilet renovation project is different.

So depending on what the surrounding fixtures are and the distances between them you may be able to use a 4 inch drain.

Our qualified plumbing team can help you work out what is required. Yes it is possible to move a toilet a few inches to help with creating space in your bathroom. The Nu-Trend plumbing team can help with these scenarios. Although, it is important to consider that depending on how the toilet was installed on the floor there is a chance it could be damaged when it is removed from the base to the sewer pipe. Michael has been in the industry for more than 20 years, passing his knowledge and expertise to Rick as the family tradition lives on.

Rick has always enjoyed the finer elements design details. Not content with solving plumbing problems he soon broadened his skills to also do bathroom renovations in Sydney.

Nu-Trend is a renovations company in Sydney that is available 7 days a week. With 15 years experience, the Directors Rob and Rick are hands-on, and provide a personalised service that is fully licensed, insured and qualified.

They give the plumbing industry technical direction to enable compliance with required regulatory frameworks. It means you are talking directly to the owners of the business, the guys who are accountable and responsible rather than via email or through customer service teams.

It is why they are able to provide a written guarantee that demonstrates their confidence in standing by the quality of their workmanship and the service they deliver to every single client.

They have a very single minded commitment to deliver a high level of professionalism and quality. With so many years in the trade, the Nu-Trend team has seen their fair share of sales tricks, special offers, promotions and other gimmicks to secure business.

Rather than copy what everyone else is doing they decided a long time ago to avoid all the typical gimmicks and stick to clear, upfront information and pricing, including the provision of free Quotes.

What have people said About Us. Rather than use lots of photos copied from Google or from bathroom suppliers the Nu-Trend team shares real life examples of their work. Take a look at some of the bathroom renovations or local plumber jobs they have done around Sydney. Making a bathroom with bath and shower larger in Sylvania Waters.

We made this bathroom bigger so that there was more space for the walk in shower and free standing bath to be installed. Toilet converted to an ensuite bathroom with shower in Sylvania Waters. You can add value to your home and practicality by converting a 3 way bathroom into separate rooms.

Nu-Trend has been operating since as an independent sole trader in Sydney. Rick provides all types of services for small bathroom renovations, leaking tap repairs, hot water high-pressure jet blasting and more. Moving a toilet in a house or unit. Is moving a toilet possible with a domestic plumber?

Can you move a toilet on a concrete slab or does it need a bathroom renovation? How much does moving a toilet cost? How did we move this toilet? Other frequently asked questions about moving a toilet. Taking on the job requires a good understanding of the basic steps, as well as considerable experience with all the skills involved. Moving a toilet is not so much about moving the actual fixture—in fact, installing a toilet is a simple job that takes less than an hour—as it is about moving the drainage and the water supply plumbing to the new location.

Once all of the plumbing is in place, installing the toilet is a relatively easy task. The below-floor toilet drainage pipes are wide in diameter—usually 3 inches—and difficult to route around or through flooring joists. Other services running underneath floors further complicate matters: water supply pipes, electrical cables, insulation, cross-bracing for the joists, recessed lights, and more.

While usually this can be managed, it can limit the distance of the new toilet location, since the toilet needs to remain close enough to the vent stack or main drain to accommodate the necessary slope.

If possible, then, try to plan your new toilet location so that the new drain can run in the spaces between joists, and try to avoid notching out joists to run the pipes.

Do so may require adding structural reinforcement if the alterations are substantial enough to compromise the strength of the floor framing. A second part of the project is less difficult: running a water supply line to the toilet.

Toilets need a supply of fresh water to fill the tank after every flush. Because these pipes are smaller, they can more easily be routed through joists or even inside of wall systems. A relocated supply line might even tap into the existing toilet supply line and send it to the new location.

Bendable plastic PEX pipes make this job easier for do-it-yourselfers when compared to the older classic method of running copper pipes and sweat-soldering the connections. The drainage line and water supply line run in the spaces between parallel joists—not across the joists, which makes for a more complicated installation.

Our example assumes that the existing waste-vent stack and toilet drain are made from ABS plastic pipe—which is the most common scenario. If your waste-vent stack is made from a different material—cast iron or PVC plastic are other common possibilities—this may slightly change how to connect the new toilet drain to the stack.

Depending on where your toilet is being moved to, the precise drain fittings needed may vary. It is critical, however, that the flow into the waste-vent stack use the gradual bends provided by sweeps and wye fittings, not sharp elbows that interfere with smooth drain flow. Remove the toilet from its current location. If the toilet is to be reused, set it carefully aside to avoid breaking or chipping the porcelain. Otherwise, dispose of the toilet in a responsible manner.

Force a rag into the drainpipe to avoid losing tools and to block sewer gases from rising into the home. Toilet drainage lines that run through flooring systems can potentially be accessed from either above or below.

If you have a loose-lay floating floor, you may wish to remove it and cut out enough sub-floor with the circular saw to access the area underneath. This is especially helpful if the subfloor has begun to rot out or if it needs to be entirely replaced. This minimizes damage to the joists, which can be used as nailing surfaces for the replacement subfloor. Corroded pipes may crack, develop holes, or loosen, and all of these things can trigger water leaks.

All plumbing materials age over time, and when they do, they become susceptible to damage and leaks. Pipe connections loosen over time and washers lose their flexibility and thickness. Thus, an old plumbing system is more likely to have hidden leaks than a new plumbing installation.

Lastly, your water pipes may also crack or burst during the winter season. Water expands when it freezes, and the ice frozen water may exceed the volume of the pipes and cause cracks. Even hairline cracks expand with time and cause water leaks, particularly if the water pressure is high. Hopefully, your house won't experience hidden plumbing leaks any time soon. We have a wealth of experience with residential plumbing systems and will help you avoid the consequences of plumbing leaks.

Email: svcamcit1 aol. Address: Plank St. Fort Wayne, IN 46 81 8. Call Us Now! Major Considerations for Moving a Toilet during a Bathroom Remodel A bathroom remodel is one of the most popular projects for homeowners to undertake. You can have an open floor plan with a soaking tub and a double vanity. You can even stash it behind a wall for privacy — if only you can move the toilet.

If you're thinking of a bathroom remodel that involves moving a toilet, below are some of the major considerations. Toilet Drainage The biggest issue related to moving a toilet has to do with its main function, which is to funnel away waste. In fact, this function involves two-fold plumbing. The first function may be obvious — the toilet sits on a waste pipe through which the waste flows.

This waste pipe connects to a vertical sewer pipe, which in turn connects to a horizontal sewer line which flows to the city's main line. The waste pipe must still connect to the vertical sewer pipe, usually while allowing for a slope.

This realignment is possible, but it takes more involved plumbing than, say, moving a sink. The second related function is the toilet vent. Toilet Vent It's not enough for your toilet — or any other plumbing system — to just drain. The system must also involve venting. Within your walls are a series of pipes. Not all of the pipes are for carrying water. Vent pipes branch out from drain pipes. Rather than go down to a sewer line, they climb up to your roof.

Their purpose is to provide air to help water flow. They also carry odors out of the house, especially in the case of toilet vent pipes.

So, when moving a toilet, you have the drain pipe alignment with the mainline sewer pipe as well as proper alignment with a vent pipe. From there, you also have the actual water supply. Water Supply Tapping into a water supply line isn't as complicated as moving drain and vent pipes. However, it's still a big consideration. Naturally, your toilet needs a supply of water to refill the tank after flushing. Typically, this need means the toilet must be located near a wall containing water lines.

Water supply is also part of the drain-waste-vent system of your house.